Test::MockFile(3)

NAME
Test::MockFile - Allows tests to validate code that can interact with files without touching the file system.

VERSION
Version 0.037

SYNOPSIS
Intercepts file system calls for specific files so unit testing can take place without any files being altered on disk.

This is useful for small tests <https://testing.googleblog.com/2010/12/test-sizes.html> where file interaction is discouraged.

A strict mode is even provided (and turned on by default) which can throw a die when files are accessed during your tests!

    # Loaded before Test::MockFile so uses the core perl functions without any hooks.
    use Module::I::Dont::Want::To::Alter;

    # strict mode by default
    use Test::MockFile ();

    # non-strict mode
    use Test::MockFile qw< nostrict >;

    # Load with one or more plugins

    use Test::MockFile plugin => 'FileTemp';
    use Test::MockFile plugin => [ 'FileTemp', ... ];

    # Be sure to assign the output of mocks, they disappear when they go out of scope
    my $foobar = Test::MockFile->file( "/foo/bar", "contents\ngo\nhere" );
    open my $fh, '<', '/foo/bar' or die;    # Does not actually open the file on disk
    say '/foo/bar exists' if -e $fh;
    close $fh;

    say '/foo/bar is a file' if -f '/foo/bar';
    say '/foo/bar is THIS BIG: ' . -s '/foo/bar';

    my $foobaz = Test::MockFile->file('/foo/baz');    # File starts out missing
    my $opened = open my $baz_fh, '<', '/foo/baz';    # File reports as missing so fails
    say '/foo/baz does not exist yet' if !-e '/foo/baz';

    open $baz_fh, '>', '/foo/baz' or die;             # open for writing
    print {$baz_fh} "first line\n";

    open $baz_fh, '>>', '/foo/baz' or die;            # open for append.
    print {$baz_fh} "second line";
    close $baz_fh;

    say "Contents of /foo/baz:\n>>" . $foobaz->contents() . '<<';

    # Unmock your file.
    # (same as the variable going out of scope
    undef $foobaz;

    # The file check will now happen on file system now the file is no longer mocked.
    say '/foo/baz is missing again (no longer mocked)' if !-e '/foo/baz';

    my $quux    = Test::MockFile->file( '/foo/bar/quux.txt', '' );
    my @matches = </foo/bar/*.txt>;

    # ( '/foo/bar/quux.txt' )
    say "Contents of /foo/bar directory: " . join "\n", @matches;

    @matches = glob('/foo/bar/*.txt');

    # same as above
    say "Contents of /foo/bar directory (using glob()): " . join "\n", @matches;

IMPORT
When the module is loaded with no parameters, strict mode is turned on. Any file checks, "open", "sysopen", "opendir", "stat", or "lstat" will throw a die.

For example:

    use Test::MockFile;

    # This will not die.
    my $file    = Test::MockFile->file("/bar", "...");
    my $symlink = Test::MockFile->symlink("/foo", "/bar");
    -l '/foo' or print "ok\n";
    open my $fh, '>', '/foo';

    # All of these will die
    open my $fh, '>', '/unmocked/file'; # Dies
    sysopen my $fh, '/other/file', O_RDONLY;
    opendir my $fh, '/dir';
    -e '/file';
    -l '/file';

If we want to load the module without strict mode:

    use Test::MockFile qw< nostrict >;

Relative paths are not supported:

    use Test::MockFile;

    # Checking relative vs absolute paths
    $file = Test::MockFile->file( '/foo/../bar', '...' ); # not ok - relative path
    $file = Test::MockFile->file( '/bar',        '...' ); # ok     - absolute path
    $file = Test::MockFile->file( 'bar', '...' );         # ok     - current dir

  authorized_strict_mode_for_package( $pkg )
Add a package namespace to the list of authorize namespaces.

    authorized_strict_mode_for_package( 'Your::Package' );

  file_arg_position_for_command
Args: ($command)

Provides a hint with the position of the argument most likely holding the file name for the current $command call.

This is used internaly to provide better error messages. This can be used when plugging hooks to know what's the filename we currently try to access.

  add_strict_rule( $command_rule, $file_rule, $action )
Args: ($command_rule, $file_rule, $action)

Add a custom rule to validate strictness mode. This is the fundation to add strict rules. You should use it, when none of the other helper to add rules work for you.

$command_rule a string or regexp or list of any to indicate which command to match
    =item$file_rule a string or regexp or undef or list of any to indicate which files your rules apply to.

$action a CODE ref or scalar to handle the exception. Returning '1' skip all other rules and indicate an exception.

    # Check open() on /this/file
    add_strict_rule( 'open', '/this/file', sub { ... } );

    # always bypass the strict rule
    add_strict_rule( 'open', '/this/file', 1 );

    # all available options
    add_strict_rule( 'open', '/this/file', sub {
        my ($context) = @_;

        return;   # Skip this rule and continue from the next one
        return 0; # Strict violation, stop testing rules and die
        return 1; # Strict passing, stop testing rules
    } );

    # Disallow open(), close() on everything in /tmp/
    add_strict_rule(
        [ qw< open close > ],
        qr{^/tmp}xms,
        0,
    );

    # Disallow open(), close() on everything (ignore filenames)
    # Use add_strict_rule_for_command() instead!
    add_strict_rule(
        [ qw< open close > ],
        undef,
        0,
    );

  clear_strict_rules()
Args: none

Clear all previously defined rules. (Mainly used for testing purpose)

  add_strict_rule_for_filename( $file_rule, $action )
Args: ($file_rule, $action)

Prefer using that helper when trying to add strict rules targeting files.

Apply a rule to one or more files.

    add_strict_rule_for_filename( '/that/file' => sub { ... } );

    add_strict_rule_for_filename( [ qw{list of files} ] => sub { ... } );

    add_strict_rule_for_filename( qr{*\.t$} => sub { ... } );

    add_strict_rule_for_filename( [ $dir, qr{^${dir}/} ] => 1 );

  add_strict_rule_for_command( $command_rule, $action )
Args: ($command_rule, $action)

Prefer using that helper when trying to add strict rules targeting specici commands.

Apply a rule to one or more files.

    add_strict_rule_for_command( 'open' => sub { ... } );

    add_strict_rule_for_command( [ qw{open readdir} ] => sub { ... } );

    add_strict_rule_for_command( qr{open.*} => sub { ... } );

    Test::MockFile::add_strict_rule_for_command(
        [qw{ readdir closedir readlink }],
        sub {
            my ($ctx) = @_;
            my $command = $ctx->{command} // 'unknown';

            warn( "Ignoring strict mode violation for $command" );
            return 1;
        }
    );

  add_strict_rule_generic( $action )
Args: ($action)

Prefer using that helper when adding a rule which is global and does not apply to a specific command or file.

Apply a rule to one or more files.

    add_strict_rule_generic( sub { ... } );

    add_strict_rule_generic( sub  {
        my ($ctx) = @_;

        my $filename = $ctx->{filename};

        return unless defined $filename;

        return 1 if UNIVERSAL::isa( $filename, 'GLOB' );

        return;
    } );

  is_strict_mode
Boolean helper to determine if strict mode is currently enabled.

SUBROUTINES/METHODS

  file
Args: ($file, $contents, $stats)

This will make cause $file to be mocked in all file checks, opens, etc.

"undef" contents means that the file should act like it's not there. You can only set the stats if you provide content.

If you give file content, the directory inside it will be mocked as well.

    my $f = Test::MockFile->file( '/foo/bar' );
    -d '/foo' # not ok

    my $f = Test::MockFile->file( '/foo/bar', 'some content' );
    -d '/foo' # ok

See "Mock Stats" for what goes into the stats hashref.

  file_from_disk
Args: "($file_to_mock, $file_on_disk, $stats)"

This will make cause $file to be mocked in all file checks, opens, etc.

If "file_on_disk" isn't present, then this will die.

See "Mock Stats" for what goes into the stats hashref.

  symlink
Args: ($readlink, $file )

This will cause $file to be mocked in all file checks, opens, etc.

$readlink indicates what "fake" file it points to. If the file $readlink points to is not mocked, it will act like a broken link, regardless of what's on disk.

If $readlink is undef, then the symlink is mocked but not present.(lstat $file is empty.)

Stats are not able to be specified on instantiation but can in theory be altered after the object is created. People don't normally mess with the permissions on a symlink.

  dir
Args: ($dir)

This will cause $dir to be mocked in all file checks, and "opendir" interactions.

The directory name is normalized so any trailing slash is removed.

    $dir = Test::MockFile->dir( 'mydir/', ... ); # ok
    $dir->path();                                # mydir

If there were previously mocked files (within the same scope), the directory will exist. Otherwise, the directory will be nonexistent.

    my $dir = Test::MockFile->dir('/etc');
    -d $dir;          # not ok since directory wasn't created yet
    $dir->contents(); # undef

    # Now we can create an empty directory
    mkdir '/etc';
    $dir_etc->contents(); # . ..

    # Alternatively, we can already create files with ->file()
    $dir_log  = Test::MockFile->dir('/var');
    $file_log = Test::MockFile->file( '/var/log/access_log', $some_content );
    $dir_log->contents(); # . .. access_log

    # If you create a nonexistent file but then give it content, it will create
    # the directory for you
    my $file = Test::MockFile->file('/foo/bar');
    my $dir  = Test::MockFile->dir('/foo');
    -d '/foo'                 # false
    -e '/foo/bar';            # false
    $dir->contents();         # undef

    $file->contents('hello');
    -e '/foo/bar';            # true
    -d '/foo';                # true
    $dir->contents();         # . .. bar

NOTE: Because "." and ".." will always be the first things "readdir" returns, These files are automatically inserted at the front of the array. The order of files is sorted.

If you want to affect the stat information of a directory, you need to use the available core Perl keywords. (We might introduce a special helper method for it in the future.)

    $d = Test::MockFile->dir( '/foo', [], { 'mode' => 0755 } );    # dies
    $d = Test::MockFile->dir( '/foo', undef, { 'mode' => 0755 } ); # dies

    $d = Test::MockFile->dir('/foo');
    mkdir $d, 0755;                   # ok

  new_dir
    # short form
    $new_dir = Test::MockFile->new_dir( '/path' );
    $new_dir = Test::MockFile->new_dir( '/path', { 'mode' => 0755 } );

    # longer form 1
    $dir = Test::MockFile->dir('/path');
    mkdir $dir->path(), 0755;

    # longer form 2
    $dir = Test::MockFile->dir('/path');
    mkdir $dir->path();
    chmod $dir->path();

This creates a new directory with an optional mode. This is a short-hand that might be removed in the future when a stable, new interface is introduced.

  Mock Stats
When creating mocked files or directories, we default their stats to:

    my $attrs = Test::MockFile->file( $file, $contents, {
            'dev'       => 0,        # stat[0]
            'inode'     => 0,        # stat[1]
            'mode'      => $mode,    # stat[2]
            'nlink'     => 0,        # stat[3]
            'uid'       => int $>,   # stat[4]
            'gid'       => int $),   # stat[5]
            'rdev'      => 0,        # stat[6]
            'atime'     => $now,     # stat[8]
            'mtime'     => $now,     # stat[9]
            'ctime'     => $now,     # stat[10]
            'blksize'   => 4096,     # stat[11]
            'fileno'    => undef,    # fileno()
    } );

You'll notice that mode, size, and blocks have been left out of this. Mode is set to 666 (for files) or 777 (for directories), xored against the current umask. Size and blocks are calculated based on the size of 'contents' a.k.a. the fake file.

When you want to override one of the defaults, all you need to do is specify that when you declare the file or directory. The rest will continue to default.

    my $mfile = Test::MockFile->file("/root/abc", "...", {inode => 65, uid => 123, mtime => int((2000-1970) * 365.25 * 24 * 60 * 60 }));

    my $mdir = Test::MockFile->dir("/sbin", "...", { mode => 0700 }));

  new
This class method is called by file/symlink/dir. There is no good reason to call this directly.

  contents
Optional Arg: $contents

Retrieves or updates the current contents of the file.

Only retrieves the content of the directory (as an arrayref). You can set directory contents with calling the file() method described above.

Symlinks have no contents.

  filename
Deprecated. Same as "path".

  path
The path (filename or dirname) of the file or directory this mock object is controlling.

  unlink
Makes the virtual file go away. NOTE: This also works for directories.

  touch
Optional Args: ($epoch_time)

This function acts like the UNIX utility touch. It sets atime, mtime, ctime to $epoch_time.

If no arguments are passed, $epoch_time is set to time(). If the file does not exist, contents are set to an empty string.

  stat
Returns the stat of a mocked file (does not follow symlinks.)

  readlink
Optional Arg: $readlink

Returns the stat of a mocked file (does not follow symlinks.) You can also use this to change what your symlink is pointing to.

  is_link
returns true/false, depending on whether this object is a symlink.

  is_dir
returns true/false, depending on whether this object is a directory.

  is_file
returns true/false, depending on whether this object is a regular file.

  size
returns the size of the file based on its contents.

  exists
returns true or false based on if the file exists right now.

  blocks
Calculates the block count of the file based on its size.

  chmod
Optional Arg: $perms

Allows you to alter the permissions of a file. This only allows you to change the 07777 bits of the file permissions. The number passed should be the octal 0755 form, not the alphabetic "755" form

  permissions
Returns the permissions of the file.

  mtime
Optional Arg: $new_epoch_time

Returns and optionally sets the mtime of the file if passed as an integer.

  ctime
Optional Arg: $new_epoch_time

Returns and optionally sets the ctime of the file if passed as an integer.

  atime
Optional Arg: $new_epoch_time

Returns and optionally sets the atime of the file if passed as an integer.

  add_file_access_hook
Args: ( $code_ref )

You can use add_file_access_hook to add a code ref that gets called every time a real file (not mocked) operation happens. We use this for strict mode to die if we detect your program is unexpectedly accessing files. You are welcome to use it for whatever you like.

Whenever the code ref is called, we pass 2 arguments: "$code->($access_type, $at_under_ref)". Be aware that altering the variables in $at_under_ref will affect the variables passed to open / sysopen, etc.

One use might be:

    Test::MockFile::add_file_access_hook(sub { my $type = shift; print "$type called at: " . Carp::longmess() } );

  clear_file_access_hooks
Calling this subroutine will clear everything that was passed to add_file_access_hook

  How this mocking is done:
Test::MockFile uses 2 methods to mock file access:

-X via Overload::FileCheck

It is currently not possible in pure perl to override stat <http://perldoc.perl.org/functions/stat.html>, lstat <http://perldoc.perl.org/functions/lstat.html> and -X operators <http://perldoc.perl.org/functions/-X.html>. In conjunction with this module, we've developed Overload::FileCheck.

This enables us to intercept calls to stat, lstat and -X operators (like -e, -f, -d, -s, etc.) and pass them to our control. If the file is currently being mocked, we return the stat (or lstat) information on the file to be used to determine the answer to whatever check was made. This even works for things like "-e _". If we do not control the file in question, we return FALLBACK_TO_REAL_OP() which then makes a normal check.

CORE::GLOBAL:: overrides

Since 5.10, it has been possible to override function calls by defining them. like:

    *CORE::GLOBAL::open = sub(*;$@) {...}

Any code which is loaded AFTER this happens will use the alternate open. This means you can place your "use Test::MockFile" statement after statements you don't want to be mocked and there is no risk that the code will ever be altered by Test::MockFile.

We oveload the following statements and then return tied handles to enable the rest of the IO functions to work properly. Only open / sysopen are needed to address file operations. However opendir file handles were never setup for tie so we have to override all of opendir's related functions.

•   open

•   sysopen

•   opendir

•   readdir

•   telldir

•   seekdir

•   rewinddir

•   closedir

CAEATS AND LIMITATIONS

  DEBUGGER UNDER STRICT MODE
If you want to use the Perl debugger (perldebug) on any code that uses Test::MockFile in strict mode, you will need to load Term::ReadLine beforehand, because it loads a file. Under the debugger, the debugger will load the module after Test::MockFile and get mad.

    # Load it from the command line
    perl -MTerm::ReadLine -d code.pl

    # Or alternatively, add this to the top of your code:
    use Term::ReadLine

  FILENO IS UNSUPPORTED
Filehandles can provide the file descriptor (in number) using the "fileno" keyword but this is purposefully unsupported in Test::MockFile.

The reaosn is that by mocking a file, we're creating an alternative file system. Returning a "fileno" (file descriptor number) would require creating file descriptor numbers that would possibly conflict with the file desciptors you receive from the real filesystem.

In short, this is a recipe for buggy tests or worse - truly destructive behavior. If you have a need for a real file, we suggest File::Temp.

  BAREWORD FILEHANDLE FAILURES
There is a particular type of bareword filehandle failures that cannot be fixed.

These errors occur because there's compile-time code that uses bareword filehandles in a function call that cannot be expressed by this module's prototypes for core functions.

The only solution to these is loading `Test::MockFile` after the other code:

This will fail:

    # This will fail because Test2::V0 will eventually load Term::Table::Util
    # which calls open() with a bareword filehandle that is misparsed by this module's
    # opendir prototypes
    use Test::MockFile ();
    use Test2::V0;

This will succeed:

    # This will succeed because open() will be parsed by perl
    # and only then we override those functions
    use Test2::V0;
    use Test::MockFile ();

(Using strict-mode will not fix it, even though you should use it.)

AUTHOR
Todd Rinaldo, "<toddr at cpan.org>"

BUGS
Please report any bugs or feature requests to <https://github.com/CpanelInc/Test-MockFile>.

SUPPORT
You can find documentation for this module with the perldoc command.

    perldoc Test::MockFile

You can also look for information at:

•   CPAN Ratings

    <https://cpanratings.perl.org/d/Test-MockFile>

•   Search CPAN

    <https://metacpan.org/release/Test-MockFile>

ACKNOWLEDGEMENTS
Thanks to Nicolas R., "<atoomic at cpan.org>" for help with Overload::FileCheck. This module could not have been completed without it.

LICENSE AND COPYRIGHT
Copyright 2018 cPanel L.L.C.

All rights reserved.

<http://cpanel.net>

This is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See perlartistic.