=> Bootstrap dependency digest>=20010302: found digest-20190127
=> Checksum SHA1 OK for node-v10.16.3.tar.gz
=> Checksum RMD160 OK for node-v10.16.3.tar.gz
=> Checksum SHA512 OK for node-v10.16.3.tar.gz
===> Installing dependencies for nodejs-10.16.3
==========================================================================
The supported build options for nodejs are:

	dtrace openssl

The currently selected options are:

	openssl

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.node (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
nodejs-10.16.3.  Their current value is shown below:

        * PYTHON_VERSION_DEFAULT = 37

Based on these variables, the following variables have been set:

        * PYPACKAGE = python27

You may want to abort the process now with CTRL-C and change their value
before continuing.  Be sure to run `/usr/bin/make clean' after
the changes.
==========================================================================
=> Tool dependency bash-[0-9]*: found bash-5.0.11
=> Tool dependency gmake>=3.81: found gmake-4.2.1nb1
=> Tool dependency pkgconf-[0-9]*: found pkgconf-1.6.0
=> Build dependency lockf-[0-9]*: found lockf-1
=> Build dependency python27>=2.7.1nb2: found python27-2.7.16
=> Build dependency cwrappers>=20150314: found cwrappers-20180325
=> Full dependency libuv>=1.23: found libuv-1.32.0
=> Full dependency libcares>=1.6.0: found libcares-1.15.0nb1
=> Full dependency http-parser>=2.9.0: found http-parser-2.9.2
=> Full dependency icu>=64.1: found icu-64.2nb1
===> Overriding tools for nodejs-10.16.3
===> Extracting for nodejs-10.16.3
===> Patching for nodejs-10.16.3
=> Applying pkgsrc patches for nodejs-10.16.3
===> Creating toolchain wrappers for nodejs-10.16.3
===> Configuring for nodejs-10.16.3
=> Replacing python interpreter in configure tools/genv8constants.py tools/gyp/pylib/gyp/flock_tool.py.
INFO: [replace-interpreter] Nothing changed in configure.
creating icu_config.gypi
{ 'target_defaults': { 'cflags': [],
                       'default_configuration': 'Release',
                       'defines': [],
                       'include_dirs': [ '/usr/pkg/include',
                                         '/usr/pkg/include',
                                         '/usr/pkg/include'],
                       'libraries': [ '-lz',
                                      '-lhttp_parser',
                                      '-L/usr/pkg/lib',
                                      '-luv',
                                      '-L/usr/pkg/lib',
                                      '-lcares',
                                      '-L/usr/pkg/lib',
                                      '-licui18n',
                                      '-licuuc',
                                      '-licudata']},
  'variables': { 'asan': 0,
                 'build_v8_with_gn': 'false',
                 'coverage': 'false',
                 'debug_nghttp2': 'false',
                 'enable_lto': 'false',
                 'enable_pgo_generate': 'false',
                 'enable_pgo_use': 'false',
                 'force_dynamic_crt': 0,
                 'gas_version': '2.27',
                 'host_arch': 'ia32',
                 'icu_gyp_path': 'tools/icu/icu-system.gyp',
                 'icu_small': 'false',
                 'icu_ver_major': '64',
                 'llvm_version': 0,
                 'node_byteorder': 'little',
                 'node_debug_lib': 'false',
                 'node_enable_d8': 'false',
                 'node_enable_v8_vtunejit': 'false',
                 'node_install_npm': 'false',
                 'node_module_version': 64,
                 'node_no_browser_globals': 'false',
                 'node_prefix': '/usr/pkg',
                 'node_release_urlbase': '',
                 'node_shared': 'false',
                 'node_shared_cares': 'true',
                 'node_shared_http_parser': 'true',
                 'node_shared_libuv': 'true',
                 'node_shared_nghttp2': 'false',
                 'node_shared_openssl': 'false',
                 'node_shared_zlib': 'true',
                 'node_tag': '',
                 'node_target_type': 'executable',
                 'node_use_bundled_v8': 'true',
                 'node_use_dtrace': 'false',
                 'node_use_etw': 'false',
                 'node_use_large_pages': 'false',
                 'node_use_openssl': 'true',
                 'node_use_pch': 'false',
                 'node_use_perfctr': 'false',
                 'node_use_v8_platform': 'true',
                 'node_with_ltcg': 'false',
                 'node_without_node_options': 'false',
                 'openssl_fips': '',
                 'openssl_no_asm': 0,
                 'shlib_suffix': 'so.64',
                 'target_arch': 'ia32',
                 'v8_enable_gdbjit': 0,
                 'v8_enable_i18n_support': 1,
                 'v8_enable_inspector': 1,
                 'v8_no_strict_aliasing': 1,
                 'v8_optimized_debug': 0,
                 'v8_promise_internal_field_count': 1,
                 'v8_random_seed': 0,
                 'v8_trace_maps': 0,
                 'v8_typed_array_max_size_in_heap': 0,
                 'v8_use_snapshot': 'true',
                 'want_separate_host_toolset': 0}}
creating config.gypi
creating config.status
creating config.mk
running: 
    python tools/gyp_node.py --no-parallel -f make-netbsd
=> Substituting "mksnapshot" in out/deps/v8/tools/gyp/mksnapshot.target.mk out/deps/v8/src/mksnapshot.target.mk out/deps/v8/gypfiles/mksnapshot.target.mk
WARNING: [subst.mk:mksnapshot] Ignoring non-existent file "./out/deps/v8/tools/gyp/mksnapshot.target.mk".
WARNING: [subst.mk:mksnapshot] Ignoring non-existent file "./out/deps/v8/src/mksnapshot.target.mk".